Universal R-320 Instructions d'exploitation télécharger pdf (Page 32)

32/117

For further details of available biosafety systems see chapter "Anhang/Appendix, Rotoren und Zubehör/Rotors

and accessories". If in doubt, you should obtain relevant information from the manufacturer.

• The centrifuge must not be operated with highly corrosive substances which could impair the mechanical integrity

of rotors, hangers and accessories.

• Repairs must only be carried out by personnel authorised to do so by the manufacturer.

• Only original spare parts and original accessories licensed by the Andreas Hettich GmbH & Co. KG company are

allowed to be utilised.

• The following safety regulations apply:

EN / IEC 61010-1 and EN / IEC 61010-2-020 as well as their national deviations.

• The safe operation and reliability of the centrifuge can only be guaranteed if:

− the centrifuge is operated in accordance with the operating instructions,

− the electrical installation on the site where the centrifuge is installed conforms to the demands of EN / IEC

stipulations,

− prescribed tests to BGV A1, BGR 500 are carried out by an expert.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 116 117

Pas de commentaire

Universal R-320 Instructions d'exploitation Page 32